露天采场高陡边坡下深部采空区的爆破处理研究

鞍本地区是我国最大的BIF型铁矿集中分布区,其铁矿资源量/储量约占全国总量的1/4,但由于日伪时期的掠夺式开采和矿业整合开发前的无序开发利用,在一定深度空间内遗留了大量隐伏采空区,为后期实现规模化露天开采带来极大的安全隐患,成为制约露天铁矿资源安全高效开采的难题。以弓长岭露天铁矿大砬子采区高陡边坡下的深部采空区为研究对象,利用LS_DYNA软件进行采空区的安全爆破模拟研究,结合现场深部采空区爆破参数试验结果,提出了采用孔中起爆处理采空区的方法,具体参数设置为空区预留顶板厚度3 m,孔间延期时间42 ms,排间延期时间75 ms,平均炸药单耗0.237 kg/t。在上述分析的基础上,针对大砬子露天采场高陡边坡内的深部不规则多层采空区提出了分层、分区安全爆破处理的技术方案,且空区边界用切割爆破方法处理,爆破处理效果良好,采空区得到了安全有效治理。     

露天爆破智能设计系统开发及应用

为了提高露天台阶爆破设计的规范化、便捷性，对露天台阶爆破设计系统进行了开发研究。以Visual C++为开发平台，软件采用MFC框架，结合OpenGL三维引擎开发技术，实现软件从底层自主开发生态的建立。通过现场工程实践应用表明爆破设计人员可以轻松通过本系统实现三维环境下的布孔设计和爆破网络设计以及精确的GPS布孔，并取得了良好的爆破效果，提高了台阶爆破的设计质量和设计速度。爆破智能设计系统能够实现矿山爆破设计的数字化、科学化、自动化和高效化，对于露天爆破具有十分重要的意义。     

Investigation of the energy-size reduction and mineral liberation of raw coal in the Hardgrove mill

Raw coal was ground in a Hardgrove mill, and mineral liberation from coal was investigated by float-sink test and electron probe microanalyzer (EPMA). Based on EPMA, associated conditions of mineral were determined. Analyses of energy-size reduction show that energy efficiency decreases with time. For +0.074 mm progenies, yields of particles in ?1.5 g.cm^?3 decrease with the increase of size and time, and products in +1.8 g.cm^?3 show the opposite trend. EPMA of 0.25–0.125 mm, 1.5–1.8 g.cm^?3 products ground for 10 min indicates that only part of minerals are liberated. For ?0.074 mm products, the yield of particles in ?1.5 g.cm^?3 decreases by 23.36% in last several minutes, but ash content of +1.8 g.cm^?3 also decreases by 13.18%. Since breakage of raw coal in last 9 min does not reduce particle size obviously, and liberation degree cannot be improved dramatically, closed grinding of 10 min in Hardgrove mill is proper to balance the size reduction and mineral liberation.     

Enhancement of photoelectrochemical activity of Fe2O3 nanowires decorated with carbon quantum dots

Owing to its up-conversion photoluminescence, photo-induced electron transfer property, and excellent conductivity, carbon quantum dots (CQDs) have been established as effective sensitizers in combination with Fe₂O₃ nanowires for enhancing the catalytic activity of photoelectrochemical water oxidation. In comparison to pristine Fe₂O₃ nanowires, Fe₂O₃ nanowires decorated with CQDs demonstrate 27 orders of magnitude increase in photocurrent density at 0.23 V vs. Ag/AgCl. The mechanism of enhanced photoelectrochemical activity of CQDs/Fe₂O₃ composite was also investigated. Thereby, it is confirmed that the enhanced optical absorption, accelerated interfacial charge carrier transfer and effective separation of photogenerated electron-hole pairs induced by CQDs decoration account for the enhancement of CQDs/Fe₂O₃ nanowire arrays in photoelectrochemical application.     

煤矿井下风水管路压力在线监测系统的研究与应用

为提高井下管路供风、供水的安全性、可靠性，以工业环网作为网络通信平台，通过分站采集数据上传至地面，实现对煤矿井下供风、供水管道的远程实时监控及远程控制，及时发现管网故障，提高维护效率、降低损失，保障供风、供水质量，达到科学预警、降低成本、提高效率的目的。     

Solomon某金矿浸出工艺探索研究

本文对Solomon某金矿进行可行性工艺探索性研究,结果表明,混合原矿,矿石粒度为20 mm,柱浸浸出60 d,渣液合计浸出率为73.19%;浮选金精矿,超细磨粒度为P80=13 μm,金浸出率为68.90%,焙烧预氧化-细磨-氰化,可使金的浸出率提高到91.50%;加压预氧化-氰化后金的浸出率可以达到97.02%。     

基于P波模量的原位胶结充填体强度预测模型研究

原位胶结充填体质量评价通常采用单轴抗压强度作为表征指标,由于在现场工程中无法快速、准确获取充填体的强度值,因此需要建立一种参数易于获取且准确的原位胶结充填体强度预测模型。基于胶结充填体物理力学参数的内在联系,从量纲平衡的角度探索了胶结充填体单轴抗压强度与P波模量的关系。根据C矿和I矿两种原位胶结充填体的密度、P波速度及取芯强度的测试数据,采用线性拟合的方法获得了基于P波模量的原位胶结充填体强度预测模型。通过对C矿和I矿的强度预测模型拟合效果分析可知,P波模量与取芯强度呈正相关性,且拟合效果较好,证明原位胶结充填体强度预测模型精度高,具有很强的实用性。